Introducing... the PaddlersBar
We've developed the PaddlersBar to specifically fit the WeeLassie / Impulse / Sportduo gunnel. It is the base to add a full variety of accessories to your canoe's upper deck. Available lengths are 19", 31", and 39". They can be staggered on the gunnels as well, perhaps1 PaddlersBar in the front for a camera or two, and another PaddlersBar nearer the paddler for other items such as fishing gear. The real beauty of the PaddlersBar is that 4 sides can be used for mounting, not just the top section, so it multiplies the accessory possibility by 4! The PaddlersBar comes complete with gunnel mount slides.
It literally takes 30 seconds to install or remove, no drilling or any alteration on your canoe. The accessories that fasten to the PaddlersBar are just as quickly attached/removed as well... because we all want to get out on the water as soon as possible!
19" $79
31" $89
39" $99
It literally takes 30 seconds to install or remove, no drilling or any alteration on your canoe. The accessories that fasten to the PaddlersBar are just as quickly attached/removed as well... because we all want to get out on the water as soon as possible!
19" $79
31" $89
39" $99
|
The PaddlersBar Dual Magnet is designed to easily fasten to any side of the PaddlersBar to quickly and easily hold your pliers and other metallic items you need quickly. Size is 8.25" x 1". Magnet length is 2.25" each for a total of 4.5". Comes with mounting hardware.
$28 *What is "UP"? Ultralight Paddling of course!* |
PaddlersBar DualMagnet
(Mounting suggestion. Tool not included.)
|
|
The PaddlersBar PlierPost holds your favorite fishlip gripping pliers. It's especially handy when that fish is spinning and flopping on your canoe deck, and you quickly want to release him from your fishing line. It can easily be mounted on the front or the rear of the Paddlersbar.
(Or any other location... you have 4 sides to choose from !) Hardware to mount to PaddlerBar installed already. $18 |
(Mounting suggestion, tool not included.)
|
PaddlersBar PlierPost
|
|
PaddlersBar RodHolder Adapter works on the Scotty #241, and also various generic rod holders. You can use 1, 2, or more! Please remember these are not designed for catching that 500lb tuna.
The adapter comes with hardware to mount many generic rod holders to the adapter as well, including the fasteners that hold the PaddlersBar RodHolder Adapter to the FishBar itself. Includes bar mounting hardware . $16 |
PaddlersBar RodHolder Adapter
(Mounting suggestion, rod holder not included, but available.)
|
|
Need a quick mount for your GoPro or other small camera? This PaddlersBar TiltCam Mount has a joint that allows you to tilt the camera up or down.
(Want a non-tiltable mount? We've got that too.) $25 |
PaddlersBar TiltCam Mount
|
|
The Garmin Striker 4 Vivid CV is a popular fish finder for paddlers who like to fish, and see what they are fishing for! (Brand name/model owned by Garmin). This mount takes what comes already with the fishfinder, and adapts it to the PaddlersBar. Comes complete with bar mounting hardware.
Easy on, easy off once it is mounted to the fishfinder. $27 Is the sun too bright for your readout?
We have a visor available for the Garmin Striker 4 Vivid CV. $32 |
PaddlersBar adapter for Garmin Striker 4 Vivid CV
(Mounting suggestion, fish finder not included)
|
|
Have other devices you would like to fasten on the PaddlersBar? Some may use this spline, such as Railblaza. (TM owned by Railblaza). The PaddlersBar Railblaza adapter lets you interchange with their holders so you don't need to replace all the cool things you've purchased over the years.
$18 |
PaddlersBar Railblaza adapter
|
|
PaddlersBar Battery Box fastens right to the bar, easy on and easy off. Internal dimensions are 6 1/4" length, 2 3/4" wide, and 4 1/4" tall. It fits many LIFEPO4 batteries. Bar mounting hardware included. $36
Optional 10ah LIFEPO4 battery $44 Optional 10ah LIFEPO4 battery charger $24 |
PaddlersBar removable Battery Box
|
|
Transducer Trunk
This allows you to put your fishfinder transducer in 'sonar conductive goop', allowing your fishfinder to do it's thing right through the hull of your Slipstream canoe. Just set it on the canoe floor out of the way, and forget it. Pick it up when you are done, then seal it in a zip lock bag. Limited goop will flow out onto hull, yet contained, allowing a sure contact with the hull. $38 |
|
